By learning EA169F2 LED Screen Installation, you can easily install all conventional indoor LED displays.

1. The first step of LED screen installation: installation frame

Confirm the installation location: First, choose a suitable installation location based on the size and intended use of the LED screen.

Support frame installation and marking:

Use the support frame to assist installation. According to the size and layout of the frame, mark the location of the installation holes on the wall with a marker pen.Use an electric drill to drill holes at the marked locations.

Install expansion screws:

Put the expansion screws through the frame and hammer them into the holes on the wall, making sure the screws expand and are firmly fixed to the wall. Then use screws to fix the connecting pieces on the frame, making sure the connecting pieces are firm. Connect the frames together through the connecting pieces to form a complete frame system.

2.The second step of LED screen installation: Install the cabinet on the frame

Install 4 M10 screws on the four corners of the cabinet. Connect the cabinet to the frame on the wall with M10 screws, making sure the cabinet is stable and level. In the same way, connect and fix the adjacent cabinets to ensure that the structure of the entire LED screen is stable and aligned.

Using the first row of cabinets as a reference, install the second row of frames on the wall behind the cabinets. Align the lifting holes in the support frame of the second row of cabinets, and then put the second row of cabinets on, making sure the cabinets are tightly connected.

3.The third step of LED screen installation: Install the cabinet power supply and signal cables

Pass the power and signal cables through the pre-drilled holes on the cabinet and fram.Finally, connect the power cable and make sure the indicator light is on, indicating that the power connection is normal.

4.The fourth step of LED screen installation: Installing LED display module

Before installing the LED display module, make sure that the power supply and signal are disconnected. Insert the LED module into the cabinet according to the direction indicated by the arrow. Connect the signal source of the LED display (such as control card, video processor, etc.) to the module and make sure that the power cord is connected correctly. Turn on the power and check whether the LED display is displaying normally. If necessary, make fine adjustments to ensure the best display effect.